Industries / Mining and oil & gas
Where operations can’t stop, water is key
In mining and oil & gas, efficient water management is essential to keep processes running and meet operating and regulatory demands. We design treatment solutions for industrial supply, water conditioning and effluent management, tailored to each operation’s conditions and requirements.
- Onshore and offshore operations
- Water supply for industrial processes
- Wastewater and effluent treatment
- Engineering, installation and commissioning
ContinuityReliable operations
EfficiencyProcess performance
ProtectionEquipment integrity
SustainabilityResponsible water management
Water: a critical factor in mining and oil & gas
Variable water quality, solids build-up and dissolved substances can affect industrial processes, increase maintenance needs and complicate effluent management.
Did you know?Water used in mining operations can contain suspended solids, dissolved salts and metals that require specific treatment before reuse or discharge. That’s why characterizing the water is key to defining the right treatment solution for each process.
- Variable water qualityChanges in turbidity, solids and chemical composition.
- Corrosion and scalingDamage to pipes, pumps and thermal equipment.
- Effluent treatmentContaminant control before discharge or reuse.
- Supply in remote areasLogistical challenges in securing water supply.
What changes when water treatment is optimized?
Water treatment is key to operational continuity, process efficiency and responsible water resource management in mining and oil & gas. We develop engineering solutions tailored to the water characteristics, operating conditions and technical requirements of each project.
| Before | After |
|---|---|
| Treatment processes with room for improvement. | Systems adjusted to operating requirements. |
| Water quality that varies with the source and process. | Water quality controlled for its intended use. |
| Water consumption without optimization strategies. | Efficient water use and reuse potential. |
| Equipment with performance limitations. | Systems optimized to improve operating efficiency. |
| Effluent treatment challenges. | Treatment aimed at meeting applicable environmental requirements. |
Precise water control for every stage of your operation
Each industrial process requires specific water quality conditions. We evaluate physicochemical and microbiological parameters to identify treatment needs and verify the requirements that apply to water use, discharge or reuse.
- Turbidity and suspended solidsControl of particles that can affect equipment and processes.
- Hardness and salinityScale prevention and control of dissolved salts.
- Iron, manganese and other metalsControl of substances that can interfere with the process.
- Microbiological qualityControl based on water use and the required sanitary conditions.
- pHAdjustment based on process and water characteristics.
- Effluent qualityEvaluation of contaminants to define the treatment required before discharge or reuse.
A treatment train designed around your process needs
We integrate technologies based on water quality and each operation’s requirements.
1
Capture
Surface water, wells or process sources.
2
Clarification and filtration
Removal of solids, turbidity and particles.
3
Conditioning
Control of hardness, metals and chlorine.
4
Membrane technologies
Reduction of salts and specific contaminants.
5
Disinfection
Microbiological control using UV or ozone.
6
Effluent treatment
Contaminant control for discharge or reuse.
Solutions for every operating front
We adapt water treatment technologies to the needs of the mining and oil & gas industry, considering the operating conditions and requirements of each process.
- Mineral processingProcess water and solids control.
- Refining and hydrocarbonsWater treatment for industrial processes.
- Camps and servicesWater supply for drinking and operational use.
- Boilers and coolingScale control and thermal efficiency.
- Offshore operationsCompact systems for water treatment on offshore platforms.
- Effluents and dischargeWastewater treatment for discharge or reuse.
Technologies for mining and oil & gas processes
Solutions selected according to water quality, operating conditions and each process’s requirements.
Sediment filtration
Technologies to remove suspended solids and reduce turbidity.
Iron and manganese removal
Treatments to reduce iron, manganese and other metals in the water.
Reverse osmosis
Membrane technology to reduce dissolved salts and obtain lower-salinity water.
Disinfection
Technologies for microbiological control, selected according to the water characteristics, intended use and process requirements.
Frequently asked questions
What treatment does water need for mining and oil operations?
The technology depends on the supply source, water quality and each process’s requirements. We evaluate these conditions to define a suitable solution.
How can mining and oil effluents be treated?
Treatment is determined by the contaminants present, such as suspended solids, metals, hydrocarbons and pH variations, as well as discharge or reuse requirements.
How can equipment be protected from scaling and corrosion?
By controlling parameters such as hardness, salinity and pH, together with treatment technologies selected for the operating conditions.
Can treatment systems be adapted to operations in remote areas?
Yes. Solutions are sized according to site conditions, available space, required capacity and each operation’s needs.
Can water be reused in mining and oil operations?
Yes. With specific treatments, water can be conditioned for certain operational uses, depending on its quality and process requirements.
Do you offer equipment rental for contingencies or temporary needs?
Rental solutions can be evaluated based on the required capacity, service duration and operating conditions.
Boost the efficiency of your mining and oil operations, starting with water treatment
Tell us about your operation and get a technical proposal tailored to your water’s characteristics, your mining or oil process requirements and your plant’s needs.
Contact us
Office in EcuadorDe los Eucaliptos E8-70 y calle E9, Quito 170307
Phone numbers+593 99 871 1330
+593 2 280 8126
Emailinfo@sanitronec.com
Business hoursMonday to Friday
9:00 to 12:00 and 13:00 to 18:00
Office in the United States9995 NW 9th St. Circle, Suite 3, Miami, FL 33172
+1 786 972 2008